century door logo
773-809-3667
sales@CenturyDoor.net

Products and Product Data Sheets

If you would like a Product Data Sheet (PDF) for a specific door locate the door below and click the product name. If you would like a package (PDF) of all doors - Click Here


 

PC5 : Bonded 5-Ply Particleboard Core Door

Perfect for your premier projects our 5-ply door is constructed using bonded core construction and the highest quality frame components. Our door facings used to make our PC-5 doors meet or exceed all industry specifications and standards. Available in a wide variety of veneer species and sizes the PC-5 door from Five Lakes Manufacturing offers quality, performance and beauty without compromise.

  PLAM : Bonded Plastic Laminate Particleboard Core Door

High Pressure Laminate opens a whole new way to look at "wood" doors. The end user gets exactly what they are looking for with none of the variations involved with wood. Plastic Laminate is available from Wilsonart, Pionite, Formica, Nevamar and Arborite. FLM constructs all of our Plam doors using a layer of High Density Fiberboard to prevent telegraphing. Edges can be matching laminate or stained / painted.
  FPC-5 : Particleboard Core Door 5-Ply

Using the same components used to produce our PC-5 doors, our FPC-5 core is not bonded to the stiles and rails. Our door facings used to make our PC-5 doors meet or exceed all industry specifications and standards. Available in a wide variety of veneer species and sizes the FPC-5 door from Five Lakes Manufacturing offers quality, performance and beauty without compromise.
  MC5-45 : Fire Resistant Core Door

Each door is made using what we call mineral core.  There is drywall with fiberglass within the mineral core material.  These doors use specific stile and rail components. The higher the minute rating (45, 60, and 90) use slightly larger stile and rail components to help them achieve these higher ratings. The higher the minute rating indocates a smaller amount of visible glass. There are restrictions regarding lite kit sizes. 
 

MC5-60 : Fire Resistant Core Door

Each door is made using what we call mineral core.  There is drywall with fiberglass within the mineral core material.  These doors use specific stile and rail components. The higher the minute rating (45, 60, and 90) use slightly larger stile and rail components to help them achieve these higher ratings. The higher the minute rating indocates a smaller amount of visible glass. There are restrictions regarding lite kit sizes. 

 

MC5-90 : Fire Resistant Core Door

Each door is made using what we call mineral core.  There is drywall with fiberglass within the mineral core material.  These doors use specific stile and rail components. The higher the minute rating (45, 60, and 90) use slightly larger stile and rail components to help them achieve these higher ratings. The higher the minute rating indocates a smaller amount of visible glass. There are restrictions regarding lite kit sizes. 

 

FPC-9 : Particleboard Core Door 9-Ply

Using the same components used to produce our PC-5 doors, our FPC-9 core is not bonded to the stiles and rails. Our door facings used to make our PC-5 doors meet or exceed all industry specifications and standards. Available in a wide variety of veneer species and sizes the FPC-9 door from Five Lakes Manufacturing offers quality, performance and beauty without compromise.

  IHC-5 : Institutional Hollow Core Door

Sometimes a doors needs to be lighter in weight, but still have blocking for complex hardware situations. Institutional Hollow Core (IHC) by FLM is your answer. Our IHC doors weigh 1/3 less than a particleboard door providing the ease of movement needed in certain situations. All FLM face veneer and factory finish options are available.
  SHC-5 : Standard Hollow Core Door

Standard Hollow Core by Five Lakes Manufacturing provides the lightest weight door available. Weighing about . that of our PC-5 door, the SHC-5 door allows even further weight savings. SHC-5 doors can be made with extra internal blocking to allow for different hardware configurations. SHC-5 by FLM can also be factory finished to match other doors on your order.
  SCL-5 : Structural Composite Lumber Core (Universal Construction)

Structural Composite Lumber (SCL) allows maximum flexibility and strength. SCL doors can be cut down without regard to stile and rail size limitations. SCL doors can also be used when white boards or clothing hooks need to be applied to one surface. FLM recommends that SCL cores be used for all full lite doors. All FLM face veneers and factory finish options are available.
  PC-5 : Lead-Lined Bonded 5-Ply Particleboard Core Door

When radiation protection is needed Five Lakes Manufacturing has the solution with our lead lined door series. We offer 1/16". 3/32" and 1/8" lead thicknesses based on your protection needs. You can pick any species and pre-finish color including plastic laminate and primed hardboard. Purchasing lead lined doors from Five Lakes allows the entire order to ship without waiting for the lead lined doors to arrive from a different manufacturer.

 

  FPC-9 : Primed Hardboard

Perfect for painting, primed hardboard by Five Lakes Manufacturing offers engineered performance perfect for your paint grade project. The components used to manufacture FPC-PHB doors meet the same specifications as our PC-5 doors. FPC-PHB is also has economical advantages over "paint grade" wood doors.
  PC-5 : Bonded 5-Ply Particleboard Core Door (No Added Urea Formaldehyde)

Specifications often demand that door assemblies be made with "No Added Urea Formaldehyde" (NAUF). Five Lakes Manufacturing has the solution with our PC-5 NAUF Series. Using components and adhesives that have no formaldehyde added you can be assured that these doors will meet these new demands. PC-5 NAUF can also be made FSC Certified.
  PC-5 : Bonded 5-Ply Particleboard Core Door (FSC Certified)

Protecting the environment has always been important to FLM. To further strengthen our care for our natural resources FLM now offers Forest Stewardship Council (FSC) certified doors. This Chain of Custody (C of C) certification gives end users the assurance that proper procedures have been followed from the forest to the door opening.
 

PC-45 : Fire Resistant Particleboard Core Door

45 Minute rated fire door with NO BLOCKING REQUIRED solution! See Product Data Sheet for more detail.


Contact us at: 773-809-3667 or Email us at: sales@CenturyDoor.net

Factory Finish Guide




The benefits of specifying prefinished wood doors:

  • Uniform Color, Texture & Sheen.
  • Proper Sanding prior to application of finish.
  • Protection from Unfavorable Humidity Conditions at the earliest possible time.
  • Cost Savings & shorter installation time on job site, resulting in faster project completion.

This veneer samples below illustrate the basic color and gloss of our St. Clair Series finish.  There may be definite variation of color in the finished product, due to the natural variations in the color of the doorskin, grain density, and grain texture.   Stain bases, topcoat compounds and lighting conditions can combine to make exact color matching nearly impossible.  The manufacturer cannot guarantee that the images below accurately represent the product color or grain samples.  Upon request we will supply you with  samples which will accurately display colors and illustrate this variance.

Birch - Pre-Finish Options (These samples are for color selection only and should not be used for grain pattern selection.)

Amber Cherry

Brown

Chestnut

Cinnamon

Wheat

Harvest

Mahogany

Pecan

Port

Clear

   

 

Red Oak - Pre-Finish Options (These samples are for color selection only and should not be used for grain pattern selection.)

Amber Cherry

Brown

Chestnut

Cinnamon

Wheat

Harvest

Mahogany

Pecan

Port

Clear

   

Contact us at: 773-809-3667 or Email us at: sales@CenturyDoor.net

Resources

Select a resource and click to expand for further information.


+ LEED Opportunities

LEED® OPPORTUNITIES FOR INTERIOR WOOD DOORS
LEED® -NC version 2.2

The United States Green Building Council (USGBC) has developed a program to promote commercial building design, construction and material use that is sensitive to environmental issues. The program uses the acronym LEED®, which stands for Leadership in Energy and Environmental Design. The program sets guidelines for earning credits that go toward a certification for an environmentally sound building upon completion. While the LEED® program addresses many design and construction aspects of a building, this Bulletin's focus is on interior wood doors.

There are seven specific credits of the LEED® program applicable for wood doors. It is important to point out that contributing to credits by meeting guidelines for wood doors does not automatically grant the project a LEED® certification. All earned credits for the whole building are combined to determine the certification level. Listed below are the attributes with a basic description and intent. The following pages describe in much more detail the components of each credit.

Click here to download the full text Tech Bulletin (PDF)



+ Fire Ratings

The Warnock Hersey Mark (WH)

The Warnock Hersey Mark (WH) is North America’s leading product safety and performance mark for building and construction products.

Products bearing the WH Mark indicate compliance to relevant building codes, association criteria, and product safety and performance standards. Nearly 80% of North America's wood fire-rated doors bear the WH Mark.



Door Handling and Installation
Below are helpful door handling and installation resources. Select a link to learn more.

+ Installation Instructions
  1. Deliver door(s) to building site after plaster of cement is dry. If doors are stored for more than one week, all edges should be sealed.
  2. Handle with clean gloves and do not drag doors across on another or other surfaces.
  3. Store flat on level surface in a dry, well ventilated building. Cover to keep clean, but allow for air circulation.
  4. Doors should not be subjected to abnormal heat, extreme dryness, humid conditions or sudden changes therein. They should be conditioned to average prevailing relative humidity of the locality before hanging.
  5. The utility or structural strength of the door must not be impaired in the fitting of the door, the application of hardware, or cutting or altering the door for lights, louvers, panels or any other special details.
  6. For exterior doors, use three hinges on doors 7' in height or less, and four hinges on doors over 7' in height.
  7. For all interior doors use three hinges, except two hinges may be used for hollow core doors weighing less than 50 pounds or 6'8" or less in height. All doors 7'5" or higher require four hinges. Allow a fitting clearance of 1/16 inch on the hinge side and 1/8 inch on the lock side.
  8. When light or louver cutouts are made in exterior doors, they shall be properly protected to prevent moisture from leaking into the core. When installed for outdoor swing with no protection from the elements, door must be properly protected by flashing or other suitable means.
  9. Before finishing, remove handling marks or effects of exposure to moisture with a thorough, final sanding over all surface of the door using3/0 and 5/0 sandpaper and clean before applying sealer or finish. Some species of wood (oak particularly) contain a chemical which reacts unfavorable with certain finishes. Where possible, the surface should be tested for such unfavorable actions. Application of a sealer before finishing will usually prevent this difficulty. The full beauty of wood is best emphasized by the use of a satin or semi-gloss finish.
  10. Immediately after fitting or cutting for closures, weatherstrip and/or threshold, and before hanging any interior or exterior door on the hob, the entire door, including the top and bottom edges, must receive an application of primer and two coats of a good grade of paint, varnish or lacquer. Adequate drying time must be allowed between coats. For job-site finishing, do not use a water thinned paint unless an oil-based prime coat is first applied. Exterior finishes shall be used on the exterior face and all edges of exterior doors.
  11. Latex or oil-based paints do not always cover spaces on the face of birch doors. Therefore, birch doors should be finished only with stain and varnish. If a painted surface is desired, a hardboard faced door should be used.
  12. Before machining check all six sides for damage. Damaged doors which are machined by customers, are not returnable for credit.

+ Handling, Job Finishing And Installation Instructions
  1. These doors are now your responsibility, treat them with care. Keep them dry, clean and in a protected area. Failure to perform any of these steps will result in the doors being ruined without warranty protection.
  2. If the doors have been finished by Five Lakes keep the poly bag on the door as long as possible. Dust can be wiped off of a factory finished door with a clean cloth.
  3. If the doors are not factory finished use extreme care when handling and preparing the doors. The doors will need to be sanded to achieve the quality level that you desire. How much time and energy it takes to achieve your desired results is entirely your responsibility. Under no circumstances does Five Lakes Manufacturing warrant the results of doors not finished by Five Lakes Manufacturing.
  4. Barber Poling - Book matched and other similar veneer cuts will almost always exhibit barber poling when finished.
  5. Pre-drilling of screw holes is required to minimize the chances of the wood splitting whether the door is fire rated or not. However, the use of powered screw drivers can and will increase the chance of the wood splitting as the head of the screw seats. Five Lakes Manufacturing does not warrant wood that is splitting from a screw hole.
  6. Warping is becoming increasingly rare as more engineered wood products are being used in the manufacturing of the doors. However, if a door does warp we ask that you look closely at the recent changes to the environmental conditions, ensure that frame and installation are true, and that the doors have been properly finished on all 6 sides.
  7. Fire Labels - Leave them on the door if the door is being finished in the field. If you take them off the label will be destroyed and we cannot mail you new labels.

+ Fire Door Installation Instructions
  1. Trimming for height may be done on the bottom rail only (per NFPA 80, maximum trim of 3/4" allowed on-site).
  2. Surface mounted hardware shall be attached with throughbolts unless interior blocking is provided.
  3. A maximum 1/8" clearance between the frame and door (or leaves of a pair) is allowed.



+ Warranty Information

Download a PDF version of our Warranty Information

A.) STANDARD WARRANTY

The above manufacturer warrants all doors sold under this warranty (except those doors expressly excluded from this warranty), for 1 year from the date of shipment, and at the time of shipment to be of good material and workmanship and to be free of defects which would render said doors unserviceable or unfit for their ordinary recommended use. This warranty extends only to the first purchaser at retail of said door(s) and may not be enforced by any person to whom the said door(s) are transferred. Any implied warranties which the purchaser may have are limited in duration to 1 year from the date of shipment. This warranty applies to interior use only.

Telegraphing And Warp Tolerances

  1. Stile, rail, and core show-through (telegraphing of flush doors shall not be considered a defect unless the faces of the door vary from the true plain in excess of 1/100 inch in any three - inch span.
     
  2. Warp shall not be considered a defect unless it exceeds . inch in the plane of the door itself. The following warp tolerances are for 1-3/4 inch or thicker doors. Doors wider than 3'6" and higher than 7' in height, the warp shall not exceed ." in any 3'6" section by the height of the door. Doors which are 1/8 inch or 1-3/8 inch thick, the warp shall not exceed .", other than excluded below.
     
  3. "Warp" is any distortion in the door itself and does not refer to the relationship of the door to the frame or jamb in which it is hung. The term "warp" shall include bow, cup, and twist. Measuring the amount of warp present in a door, the following method shall be used: bow, cup, and twist shall be measured by placing a straight edge, taut wire or string on the suspended concave face at any angle (i.e. horizontally, vertically, diagonally), with the door in its installed position.
     
  4. The measurement of bow, cup and twist shall be made at the point of maximum distance between the bottom of the straight edge, taut wire and the face of the door.

Matters Excluded From This Warranty

  1. Unsatisfactory service or appearance caused by failure to follow recommended "Handling, Job Finishing and Installation Instructions," appearing at the bottom of this warranty, is not covered by this warranty.
     
  2. The appearance of field finished doors is not warranted in any event.
     
  3. Natural variations in color or texture of wood are not to be considered defects.
     
  4. The warranty against warp does not apply to the following:
    • All 1-3/8 inch and 1-3/4 inch thick doors which are wider than 3'0" or higher than 7'0".
    • Doors with face veneers of different species.
    • Doors that are improperly hung or do not swing freely.
  5. This warranty does not cover.
    • Doors with cut-outs for lights and/or louvers, any edge of which is nearer than 5 inches to any edge of the door.
    • Doors with cut-out areas exceeding 40% of the area of the face of the door.
    • Doors with cut-out areas exceeding one-half of the height of the door.
    • Doors having less than 5 inches between cut-outs for lights (flush doors) unit locks, closers, and / or other hardware cut-outs.
    • Any delamination caused by failure to protect and seal all exposed surfaces of the door.

Execution Of Warranty

  1. If warranted doors are found to contain defects as stated above, the manufacturer, may, at its option, either: (A) repair the door(s) without charge; (B) replace the door(s) without charge, in the same stage of fitting and / or finishing as it was originally supplied: or (C) refund the price paid to it for the door(s). The manufacturer will perform its obligations under the warranty within 30 days after an appropriate notice is given by the purchaser to it.
     
  2. The procedure which the producer should follow in order to obtain performance of any warranty obligation is as follows;
    • If at the time a door shipment is received, said door(s) is found to have a defect(s) which can be reasonably discovered by inspection of each door(s), the purchaser must, prior to hanging or fitting, and within 30 days, send written notice of said discovered defect(s) to the manufacturer.
    • If a defect is discovered or occurs after a door is fitted and hung, written notice of said defect(s) must be sent to the manufacturer within one year of the date of shipment.
    • The manufacturer will not be liable for any door(s) repaired or replaced without its prior consent.
  3. Action on any claim for warp or for telegraphing defects may be deferred, at the option of the manufacturer, for a period not to exceed 12 months from the date of claim. If a door has been installed prior to such a claim being made, the door must remain hung in the original installation during the period of deferment to permit conditioning to humidity and temperature.
     
  4. The manufacturer's sole responsibility under this warranty is as stated herein, and it shall not be liable for consequential, indirect, or incidental damages, or for any amount in excess of its price for the shipment involved, whether the claim is for breach of warranty or negligence.
     
  5. This warranty gives the purchaser specific legal rights. The purchaser also has implied warranty rights. In the event of a problem with warranty service or performance, the purchaser may be able to go to small claims court , a State court, or a Federal district court.

 

B.) LIMITED LIFETIME WARRANTY FOR WOOD DOORS

The manufacturer warrants all doors sold under this warranty (except those doors expressly excluded from this warranty) to be of good material and workmanship and to be free of defects which would render said doors unserviceable or unfit for their ordinary, recommended use. This warranty only extends to the first purchase at retail of said door(s) and may not be enforced by any person to whom the said door(s) are transferred.

Telegraphing And Warp Tolerances

  1. Stile, rail and core show-through (telegraphing) on flush doors shall not be considered a defect unless the faces of the door vary from a true plane in excess of 1/1000 inch in any three-inch span after 1 year has passed.
     
  2. Warp shall not be considered a defect unless it exceeds ." in the plane of the door itself. The following warp allowances are for 1-3/4 inch or thicker doors. For doors wider than 3'6" and less than 7' in height, the warp shall not exceed ." in a section 2'6" by the height of the door. Doors wider than 3'6" and higher than 7', the ward shall not exceed ." in any 3'6" by 7' section. Doors up to and including 3'6" wide and over 7' in height, the warp shall not exceed ." in and 7' by width of door section. Doors that are 1-1/8" or 1-3/8 inch thick, the warp shall not exceed ." other than excluded below. "Warp" is any distortion in the door itself and does not refer to the relationship of the door to the frame or jamb in which it is hung.

    The term "warp" shall include bow, cup and twist. Measuring the amount of warp present in a door, the following method shall be used: bow, cup and twist shall be measured by placing a straight-edge, taut wire or string on the suspected concave face of the door at any angle (i.e. horizontally, vertically, diagonally), with the door in its installed position. The measurement of the bow, cup and twist shall be made at the point of maximum distance between the bottom of the straight-edge, taut wire or string and the face of the door.

Matters Excluded From This Warranty

  1. Unsatisfactory service or appearance caused by failure to follow recommended "Handling, Job Finishing and Installation Instructions", appearing below this warranty, is not covered by this warranty.
     
  2. The appearance of field finished doors is not warranted in any event.
     
  3. The appearance of a birch faced door which has been painted is not warranted in any event. (See Number 12 of the Handling, Job Finishing and Installation Instructions below).
     
  4. Natural variations in the color or texture of wood are not to be considered as defects.
     
  5. The warranty against warp does not apply to the following:
    • All 1/1/8 inch and 1-3/8 inch thick doors which are wider than 3'0" or higher than 7'0".
    • All 1-3/4 inch thick stile and rail doors wider than 3'0" and higher than 7'0".
    • Doors with face veneers of different species.
    • Doors that are improperly hung or do not swing freely.
       
  6. This warranty does not cover:
    • Flush doors with cutouts for lights and/or louvers, any edge of which is nearer than 5 inches to any edge of the door.
    • Flush doors with cutout areas exceeding 40% of the area of the face of the door.
    • Flush doors with cutouts exceeding one-half the height of the door.
    • All doors having less than 5 inches between cutouts for lights (flush doors), unit locks, closures and/or other hardware cutouts.
    • Any delamination caused by failure to protect and seal all exposed surfaces of the door.

      If warranted doors are found to contain defects as stated above, the manufacturer may, at its option either: (1) repair the door(s) without charge: (2) replace the door(s) at no charge, in the same stage of fitting and/ or finishing as was originally supplied to an amount to cover the purchaser's cost in finishing and hanging the door(s), which amount shall not exceed the manufacturer's selling price of the door(s): (3) refund the price paid for the door(s) together with an additional amount to cover the purchaser's cost in finishing and hanging the door(s), which amount shall not exceed the manufacturer's selling price of the door(s). The manufacturer will perform its obligations under the warranty within 60 days after an appropriate notice is given by the purchaser to it. The procedure which the purchaser should follow in order to obtain performance of any warranty obligation is as follows:

      If at the time a door shipment is received said door(s) is found to have a defect(s) which can be reasonably discovered by inspection of each door(s), the purchaser must prior to hanging or fitting and/or finishing, and within 30 days, send written notice of said discovered defect(s) to the manufacturer.

      If a defect is discovered or occurs after a door is fitted and hung, written notice of said defect(s) must be sent to the manufacturer within one year from date of shipment.

      The manufacturer will not be liable for any door(s) repaired or replaced without prior written consent. Action on any claim for warp or for telegraphing defects may be deferred, at the option of the manufacturer for a period not to exceed 12 months from the date of the claim. If a door has been installed prior to such claim being made, the door must remain hung in the original installation during the period of deferment to permit conditioning to humidity and temperature.

      THE MANUFACTURER'S SOLE RESPONSIBILITY UNDER THIS WARRANTY IS AS STATED HEREIN, AND IT SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL INDIRECT, OR INCIDENTAL DAMAGES OTHER THAN AS SPECIFIED ABOVE, INCLUDING BUT NOT LIMITED TO, ANY COSTS INVOLVED OR ASSOCIATED WITH REHANGING, REPAINTING, REFITTING, OR REFINISHING ANY DOOR, REGARDLESS OF WHETHER THE CLAIM IS FOR BREACH OF WARRANTY OR NEGLIGENCE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

      This warranty gives the purchaser specific legal rights. The purchaser also has implied rights. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.



+ Door Glossary

The following definitions are extracted from WDMA I.S.1A-11, Industry Standard for Architectural Wood Flush Doors and WDMA I.S.6A-11, Industry Standard for Architectural Stile and Rail Doors
 
Astragal - A moulding or trim attached to the meeting edges of adjacent door leaves in order to prevent swing through and to conceal the gap. Also may be used for sound control, bullet resistance and x-ray shielding.
 
Balanced Match - Two or more veneer components or leaves of equal size (prior to edge trimming) to make up a single face.
 
Bar - A narrow, horizontal, vertical, or diagonal wood member extending the total length or width of a glazed opening, used to separate individual pieces of glazing.
 
Barber Pole - An effect in book matching of veneers. Because the "tight" and "loose" sides alternate in adjacent veneer leaves, they may accept stain or reflect light differently, resulting in a noticeable but acceptable color variation. Barber Pole is not considered a manufacturing defect.
 
Bark Pocket - Comparatively small area of bark around which normal wood has grown.
 
Bevel - A machine angle other than a right angle, i.e., a 3 degree bevel that is equivalent to a 1/8 inch drop in a 2 inch span (1 mm in 16 mm).
 
Beveled Edge - An edge of the door which forms an angle of less than 90 degrees with the face of the door, such as a 3 degree beveled edge.
 
Bird Peck - A mark or wound in a tree or piece of wood caused by birds pecking on the growing tree in search of insects.
 
Bladder Pressed Panel  - See "Membrane Pressed Panel".
 
Blended Repair Tapering - A repair referring to end splits, repaired with wood or filler similar in color to blend well with adjacent wood.
 
Blending - Color change that is detectable at a distance of 6 ft. to 8 ft. (1.8 m to 2.4 m) but which does not detract from the overall appearance of the door.
 
Blind Mortise and Tenon - A method of construction of stile and rail wood doors where openings are machined into, but not through the stiles and where the ends of the rails are so machined as to fit these openings.
 
Blister - Spot or area where veneer does not adhere.
 
Blocking - A material used to replace core material in specific locations to provide improved screw holding for the attachment of hardware. Blocking is only required where the screw holding power of the core is less than required by the applicable performance duty level.
 
Bonded Core - Stiles and rails (edge bands) are securely glued to the core prior to application of crossbanding, three ply skins, veneers or laminate.
 
Book Match - Adjacent leaves of veneer from a flitch or log are opened like a book and spliced to make up the face with matching occurring at the spliced joints. The fibers of the wood, slanting in opposite directions in the adjacent leaves, create a characteristic light and dark effect when the surface is seen from an angle.
 
Book Size - The height and width of a door prior to prefitting.
 
Bow - A flat wise deviation from a straight line drawn from top to bottom; a curvature along the length of the door.
 
Brashness - A condition of wood characterized by a low resistance to shock and by abrupt failure across the grain without splintering.
 
Bullet Resistant Doors - Doors that resist penetration by shots of varying caliber. Resistance may be rated as resistant to medium power, high power, or high power small arms and high power rifles.
 
Burl - A swirl, twist or distortion in the grain of the wood, which usually occurs near a knot or crotch. A burl can often be associated with abrupt color variation and/or a cluster of adventitious buds.
 
Burl, Blending - A swirl, twist or distortion in the grain of the wood which usually occurs near a knot or crotch but does not contain a knot and does not contain abrupt color variation.
 
Butt Joint - A joint formed by square edge surfaces (ends, edges, and faces) coming together; end butt joint, edge butt joint.
 
Cathedral Grain - A grain appearance characterized by a series of stacked and inverted "V"s, or cathedral type of springwood (earlywood) summerwood (latewood) patterns common in plain sliced (flat cut) veneer (see split heart).
 
Center Match - An even number of veneer components or leaves of equal size (prior to edge trimming) matched with a joint in the center of the panel to achieve horizontal symmetry.
 
Certified Wood - Wood products that have been qualified by an independent third party agency as satisfying their proprietary requirements for responsible environmental practices.
 
Chatter - Line appearing across the face at right angles to the grain giving the appearance of one or more corrugations resulting from bad setting of sanding equipment.
 
Checks - Small slits running parallel to grain wood, caused chiefly by strains produced in seasoning and drying.
 
Clustered - When a defect described in the grading rule is sufficient in number and sufficiently close together to appear to be concentrated in one area.
 
Comb Grain - A quality of rift cut veneer with exceptionally straight grain and closely spaced growth increments resembling the appearance of long stands of combed hair.
 
Compatible - When relating door edge to face appearance, the edge may not be the same species as the face; however, it may be similar in overall color, grain, character and contrast as the face (See Matching Edge Band).
 
Component (Of Face Veneer) - An individual piece of veneer or leaf that is joined to other pieces to achieve a full length and width face.
 
Composite - A composite whose ingredients include cellulosic elements. These cellulosic elements can appear in the form of, but are not limited to: distinct fibers, fiber bundles, particles, wafers, flakes, strands and veneers. These elements may be bonded together with naturally occurring or synthetic polymers. Also, additives such as wax or preservatives may be added to enhance performance.
 
Composite Panel - A door panel composed of a wood derivative such as MDF. Used for opaque finishes.
 
Conspicuous - See 'burl, conspicuous' and 'knots, conspicuous pin'.
 
Coped Construction - The end of rails, mullions, muntins or bars so machined that they will fit and cover the contour of the sticking.
 
Core - The innermost layer or section in component construction. For typical constructions see: Particleboard Core, Medium Density Fiberboard Core, Structural Composite Lumber Core, Staved Lumber Core, Laminated Veneer Lumber Core, Fire Resistant Composite Core and other special core types.
 
Core, Fire Resistant - A fire resistant core material generally used in wood doors requiring fire ratings of 3/4 hour or more. Engineered composite products meeting the minimum requirements of WDMA.
 
Cross Bar (Veneer) - Irregularity of grain resembling a dip in the grain running at right angles, or nearly so, to the length of the veneer.
 
Cross Break - Separation (break) of the wood cells across the grain. Such breaks may be due to internal strains resulting from unequal longitudinal shrinkage, or to external forces.
 
Cross Figures - A series of naturally occurring figure effects characterized by mild or dominant patterns across the grain in some faces. For example, a washboard effect occurs in fiddle-back cross figure; and cross wrinkles occur in the mottle figure.
 
Crossbanding - A ply placed between the core and face veneer in 5-ply construction or a ply placed between the back and face of a 3-ply skin in 5-ply construction, typically of hardwood veneer or engineered wood product.
 
Cup - A deviation from a straight line drawn from side to side; a curvature along the width of the door.  
Dead Knots (Open Knots) - Openings where a portion of the wood knot has dropped out or where cross checks have occurred to present an opening.
 
Decay - The decomposition of wood substance by fungi.
 
Defect, Open - Checks, splits, open joints, knotholes, cracks, loose knots, wormholes, gaps, voids, or other opening interrupting the smooth continuity of the wood surface.
 
Delamination - Separation of plies or layers of wood or other material through failure of the adhesive bond.
 
Discolorations - Stains in wood substances. Some common veneer stains are sap stains, blue stains, stain produced by chemical action caused by the iron in the cutting knife coming into contact with the tannic acid in the wood, and those resulting from the chemical action of the glue.
 
Door Frame - A group of components (wood, aluminum or steel) that are assembled to form an enclosure and support for a door. Also known as door jambs.
 
Door, Bifold - Doors so hinged as to fold against the door jamb. Bifold doors are normally classified as either two- or four-leaf units.
 
Door, Combination - A door assembly of stiles and rails that will include multiple door types within a single door. These door types would typically include combinations of flat or raised panels, lites and/or louvers.
 
Door, French - A door assembly of stiles and rails (and possibly muntins and bars) surrounding a single or multiple glazed opening.
 
Door, Louver - A door assembly of stiles and rails where the interior is filled with slat or chevron louvers.
 
Door, Panel - A door assembly of stiles, rails and one or more panels. Intermediate rails or mullions are used to separate panels. Panels can be raised or flat.
 
Doweled Construction - A method of construction of stile and rail wood doors where holes are machined into, but not through, the stiles and where matching holes are machined into the ends of the rails. Glue and dowels are inserted into these holes to attach the rail to the stile.
 
Doze - A form of incipient decay characterized by dull and lifeless appearance of the wood, accompanied by a lack of strength and softening of the wood.
 
Edge Band - A strip along the outside edges of the two sides and/or top and bottom of the door (See stiles/vertical edges, rails/horizontal edges).
 
End Match - A door/transom combination where single piece of veneer extends from the bottom to the top of the door with a mirror image at the transom.
 
Engineered Construction - A method of constructing a wood stile and rail door that minimizes the use of solid lumber components. Stiles, rails and mullions have solid lumber edges only (where visible), and have face veneers over a composite core. Panels are also produced using face veneers and/or composite cores.
 
Engineered Materials - A general term used to describe any wood or plant fiber composite panel. Such products as Particleboard, MDF, SCL and LVL are described as Engineered Fiber. Typically they are made from wood or plant fiber or wood pieces and have specific quality requirements.
 
Engineered Veneer - Veneers that are first peeled, normally from Obeche or Poplar logs. The peeled veneer leaves are dyed to a specified color, and then glued together in a mold to produce a large laminated block. The shape of the mold determines the final grain configuration. The block is then sliced into leaves of veneer with a designed appearance that is highly repeatable.
 
Face Veneer - The outermost exposed wood veneer surface of a veneered wood door.
 
Face Width - The total width of the stile, rail or panel minus the width of the moulding patterns. The most common way of showing dimensions on a stile and rail door elevation.
 
Few - A small number of characteristics without regard to their arrangement in the panel
 
Fill (Putty Repairs) - A repair to an open defect usually made with fast drying plastic putty. The repairs should be well made with non-shrinking putty of a color matching the surrounding area of the wood, to be flat and level with the face and panel, and to be sanded after application and drying.
 
Finger Joint - A series of interlocking fingers precision cut on the ends of two pieces of wood which mesh together and are held rigidly in place with adhesive.
 
Fire Rated Doors - A door which has been constructed in such a manner that when installed in an assembly will pass a fire test under neutral (UL 10B) or positive (UL 10C) pressure criteria and can be rated as resisting fire for 20 minutes (1/3 hour), 45 minutes (3/4 hour), 1 hour, or 1-1/2 hours. The door must be tested and carry an identifying label from a qualified inspection agency.
 
Fire Resistant Composite Core - A core, typically incorporating minerals rather than wood fiber as the primary component, designed to improve fire resistance and thermal transmission,
 
Flake - See Fleck, Ray.
 
Flat-Cut - See Plain-Sliced.
 
Fleck, Ray (Flake) - Portion of a ray as it appears on the quartered or rift cut surface. Fleck can be dominant appearance in oak and is sometimes referred to as flake.
 
Flitch - A complete bundle of veneer sheets laid together in sequence as they are cut from a given log or section of log.
 
Gaps - Open slits in the inner ply or plies or improperly joined veneer when joined veneers are used for inner plies.
 
Glass Stop - A small wood moulding (bead) applied to the perimeter of glazed openings to secure the glazing materials within a door.
 
Grain - The direction, size, arrangement and appearance of the fibers in wood or veneer.  
Grain Slope - Expression of the angle of the grain to the long edges of the veneer component.
 
Grain Sweep - Expression of the angle of the grain to the long edges of the veneer component over a 12 inch (300 mm) length from each end of the door.
 
Gum Pockets - Well-defined opening between rings of annual growth containing gum or evidence of prior gum accumulations. Mainly cherry.
 
Gum Spots & Streaks - Gum or resinous material of color spots caused by prior resin accumulations sometimes found on panel surfaces.
 
Hairline - A thin, perceptible line showing at the joint of two pieces of wood.
 
Half-round - A method of veneer cutting similar to rotary cutting, except that the piece being cut is secured to a "stay log" a device that permits the cutting of the log on a wider sweep than when mounted with its center secured in the lathe to produce rotary sliced veneer. A type of half-round cutting is used to achieve plain-sliced or flat-cut veneer.
 
Hardboard - Homogeneous panels manufactured primarily from inter-felted lignocellulosic (wood) fibers consolidated under heat and pressure with density of 31 lb/ft3 (497 kg/m3) or more.
 
Hardwood - General term used to designate lumber or veneer produced from temperate zone deciduous or tropical broad-leaved trees in contrast to softwood, which is produced from trees which are usually needle bearing or coniferous. The term does not infer hardness in its physical sense.
 
Heartwood - The non-active center of a tree generally distinguishable from the outer portion (sapwood) by its darker color.
 
High Density Fiberboard (HDF) - No longer defined under ANSI A208.2; HDF is a marketing term to define MDF grades above Grade 150
 
High Pressure Decorative Laminate - A high impact resistant surface material consisting of decorative surface paper impregnated with melamine resins pressed over multiple craft paper layers saturated with phenolic resins, thermoset at high pressure and temperature.
 
Holes, Worm - Holes resulting from infestation by worms greater than 1/16 inch (1.6 mm) in diameter and not exceeding 5/8 inch (16 mm) in length.
 
Inconspicuous - Barely detectable with the naked eye at a distance of 6 ft. to 8 ft. (1.8 m to 2.4 m).
 
Indentations - Areas in the face that have been compressed as the result of residue on the platens of the hot press or handling damages.
 
Intumescent - A material that expands when exposed to extreme heat or fire to fill any gap between the door and frame or between doors.
 
Joint - The line of juncture between the edges or ends of two adjacent pieces of veneer.
 
Joint, Edge - Joint running parallel to the grain of the wood.
 
Joint, Open - Joint in which two adjacent pieces of veneer do not fit tightly together.
 
Kiln-Dried - Lumber dried in a closed chamber in which the removal of moisture is controlled by artificial heat and usually by controlled relative humidity.
 
Knife Cuts per inch (KCPI) - A measure of the smoothness of machined lumber. Can be determined by holding the surfaced board at an angle to a strong light source and counting the visible ridges per inch, usually perpendicular to the profile. The surface is smoother with more knife marks per inch.
 
Knife Marks - Very fine lines that appear across the panel veneer or wood solids that can look as though they are raised resulting from some defect in the lathe knife that cannot be removed with sanding.
 
Knot - Cross section of tree branch or limb with grain usually running at right angles to that of the piece of wood in which it occurs.  
Knot Holes - Voids produced when knots drop from the wood in which they were originally embedded.
 
Knots, Blending Pin - Sound knots 1/4 inch (6.4 mm) or less that generally do not contain dark centers. Blending pin knots are barely detectable at a distance of 6 ft. to 8 ft. (1.8 m to 2.4 m), do not detract from the overall appearance of the panel, and are not prohibited from appearing in all grades.
 
Knots, Conspicuous Pin - Sound knots 1/4 inch (6.4 mm) or less in diameter containing dark centers.
 
Knots, Open (Knot Holes) - Openings where a portion of the wood substance of the knot was dropped out, or where cross checks have occurred to produce an opening.
 
Knots, Sound Tight - Knots that are solid across their face and fixed by growth to retain their place.
 
Laminated Veneer Lumber Core (LVLC) - Manufactured by laminating veneer with all grain laid-up parallel. It can be manufactured by using various species of wood fiber in various thicknesses.
 
Lap (Veneer) - A condition where the pieces of veneer are so misplaced that one piece overlaps the other and does not make a smooth joint.
 
Lock Block - A concealed block the same thickness as the door stile or core which is adjacent to the stile at a location corresponding to the lock location and into which a lock is fitted.
 
Loose Side - In knife-cut veneer, that side of the sheet that was in contact with the knife as the veneer was being cut, and containing cutting checks (lathe checks) because of the bending of the wood at the knife edge.
 
Louver - A panel constructed of wood or metal slats installed in an opening to allow light, air and noise. Common types are slat and Chevron - an inverted "V" wood louver (vented or non-vented).
 
Low Pressure Decorative Laminate - A decorative surface paper that is saturated with reactive resins. During hot press lamination, the resin flows into the surface of the substrate, creating a hard crosslinked thermosetting permanent bond and permanently changing the characteristics of both the paper and the board.  
Matching Edge Band (ME) - An edge band that is the same species or laminate pattern as the face veneer.
 
Medium Density Fiberboard (MDF) - The generic name for a panel or core manufactured from lignocellulosic fibers combined with a synthetic resin or other suitable binder and bonded together under heat and pressure in a hot press by a process in which the added binder creates the entire bond.  
Medium Density Fiberboard Core (MDFC) - Wood fiber and/or agri-fiber based materials that comply with ANSI A208.2.
 
Medium Density Overlay (MDO) - Typically MDO is kraft paper saturated with resin and cured under high heat and pressure to make a hard, smooth, paintable surface.
 
Meeting Edges - Two adjacent door edges not separated by a mullion or transom bar. These are found in pair, Dutch door and door & transom applications.
 
Membrane (Bladder) Pressed Pane - Insert panel produced by moulding to profile a wood or composite core (usually MDF or particleboard) then pressing veneer to the core using a flexible pressing surface.
 
Mineral - See Streaks, Mineral.
 
Mineral Core - See Core, Fire Resistant.  
Mineral Stain - Olive and greenish-black streaks believed to designate areas of abnormal concentration of mineral matter; common in hard maple, hickory, and basswood. Also called Mineral Streak.
 
Mineral Streaks - Sharply contrasting elongated discoloration of the wood substance.
 
Mortise and Tenon - See "Blind Mortise and Tenon"
 
Moulding (Inlay) - Profiled wood trim pieces that surround the perimeter of panels or glazing, but does not protrude above the surface of the surrounding stiles and rails.
 
Mullion - A vertical member used to separate panels. Also known as a "mull".
 
Muntin - A short bar, either horizontal or vertical, used to separate individual pieces of glazing material, but which does not extend the full width or length of the glazed opening. Also known as "munt".
 
Natural - When referring to color and matching, veneers containing any amount of sapwood and/or heartwood, i.e., natural birch, maple, ash.
 
Neutral Pressure - A fire door test procedure where the neutral pressure plane is near the top of the door.
 
Nominal - A term that designates a stated dimension as being approximate and subject to allowances for variation.
 
Non-Bonded Core - Stiles and rails (edge bands) are not glued to the core prior to face materials.
 
Not Restricted - Allowed, unlimited.
 
Occasional - A small number of characteristics that are arranged somewhat diversely within the face.
 
Panel, Flat - A door panel in which the perimeter does not contain a machined profile (panel raise). Constructed with veneer on the face and a composite core for a stained finish, or MDF for a painted finish.
 
Panel, Raised - A door panel whose faces are raised above the perimeter and whose edges are shaped to fit into grooves in the stiles, rails and mullions. These panels are typically bladder pressed or rim banded for a stained finish or MDF for a painted finish.
 
Particleboard - A panel or core product composed of small particles of wood and wood fiber that are bonded together with synthetic resin adhesives in the presence of heat and pressure.
 
Particleboard Core - Wood fiber and/or agri-fiber based materials that comply with ANSI A208.1, minimum grade LD-1.  
Patches - Matching wood pieces carefully inserted and glued into the door face after defective portions have been removed.
 
Plain Sliced - Veneer sliced parallel to the pith of the log and approximately tangent to the growth rings to achieve flat cut veneer. Plain sliced veneer can be cut using either a horizontal or vertical slicing machine or by the half-round method using a rotary lathe. Also known as flat cut  
Plank Matched - A face containing specially selected and assembled dissimilar (in color, grain and width) veneer strips of the same species, and sometimes grooved at the joints between strips, to simulate lumber planking. Plank matched faces are not available pair matched or set matched.
 
Pleasing Match - A face containing components, which provide a pleasing overall appearance. The grain of the various components need not be matched at the joints. Sharp color contrasts at the joints of the components are not permitted.
 
Ply - A single sheet of veneer or several strips laid with adjoining edges that may or may not be glued, which forms one veneer lamination in a glued panel. In some constructions, a ply is used to refer to other wood components such as particleboard or MDF.
Positive Pressure - A fire door test procedure where the neutral pressure plane is located at 40 inches (1 m) above the sill.
 
Prefitting - Trimming of the door for width and/or height.
 
Puttied - See Fill.
 
Quartered (Quarter-sliced, Quarter Cut) - Veneer produced by cutting in a radial direction to the pith to achieve a straight (vertical) grain pattern. In some species, principally red oak and white oak, ray fleck is produced, the amount of which may be unlimited.
 
Rail - A horizontal structural member of a stile and rail door. Fits between the stiles.
 
Rail, Bottom - The bottom rail of a stile and rail door
 
Rail, Intermediate - A rail, other than the top and bottom rail, used to separate panels, or to separate panels from glazing materials in a combination door. Also referred to as "cross rail".
 
Rail, Lock - An intermediate rail located at approximately adjacent to the lock.
 
Rail, Top - The uppermost rail of a stile and rail door.
 
Rails/Horizontal Edges - Top and bottom edge bands of door.
 
Random Matched (Mismatched) - A face containing veneer strips of the same species which are selected and assembled without regard to color or grain, resulting in variations, contrasts and patterns of color and grain. Pleasing appearance is not required. Random matched faces are not available pair matched or set matched.  
Ray - Ribbon-shaped strand of tissue extending in a radial direction across the grain, so oriented that the face of the ribbon is exposed as a fleck on the quarter surface. Also known as Wood Ray.  
Ray Fleck - See Fleck, Ray.
 
Red/Brown - When referring to color and matching, veneers containing all heartwood, ranging in color from light to dark.
 
Repairs - A patch, shim, or filler material inserted and/or glued into veneer or a panel to achieve a sound surface.
 
Repairs, Blending - Wood or filler insertions similar in color to adjacent wood so as to blend well.
 
Rift Cut - Veneer produced by cutting at a slight right angle to the radial to produce a parallel grain pattern and quartered appearance without excessive ray fleck. Oak veneer only.
 
Rim Banded (Mitered) Panel - Insert panel with a solid lumber edge banded around the core then veneered and profiled.
 
Rotary Cut - Veneer produced by centering the entire log in a lathe and turning it against a broad cutting knife.
 
Rough Cut - Irregular shaped areas of generally uneven corrugation on the surface of veneer.
 
Running Match - The veneer face is made from components running through the flitch consecutively. Any portion of the component left over from a face is used as the beginning component or leaf in starting the next veneer face.
 
Ruptured Grain - A break or breaks in the grain or between springwood and summerwood caused or aggravated by excessive pressure on the wood by seasoning, manufacturing, or natural processes. Ruptured grain appears as a single or series of distinct separations in the wood such as when springwood is crushed leaving the summerwood to separate in one or more growth increments.
 
Rustic - Lacking excessive refinement, having a rough surface or finish.
 
Safety Glazing Materials - Glazing materials so constructed, treated or combined with other material as to minimize the likelihood of cutting or piercing injuries resulting from human contact with the material. The most common types used in doors are tempered or laminated. Safety glazing materials are required to meet codes and federal regulations.
 
Sanding (Chatter, Dust, Burns) - The degree of defects allowed in sanding of the face.  
Sapwood - The living wood of lighter color occurring in the outer portion of a tree.  
Shake - A separation along the grain of wood in which the greater part occurs between the rings of annual growth.  
Sharp Contrast - For the purpose of this standard, this term means the veneer of lighter than average color should not be joined at the edges with veneer of darker than average color, and that two adjacent pieces of veneer should not be widely dissimilar in grain, figure and natural character markings.
 
Shims - A split repaired in a piece of wood veneer, preferably from the same piece of veneer from which the face is made to ensure good color and grain match. The grain running in the same direction as the split to be inconspicuous to the naked eye, and free of any gaps where the shim joins the veneer. To be glued into the split and sanded after being made. Color matched.
 
Show Through (Telegraphing) - A defect caused by the outline and/or surface irregularities, such as frame parts, core laps, voids, etc., that is visible through the face veneers.
 
Skin - The face layer of a flush or stile and rail door, whether flat or configured, which is used for facings for flush wood doors.
 
Sliced - Veneer produced by thrusting a log or sawed flitch into a slicing machine, which shears off veneer in sheets.
 
Slight - Visible on observation, but does not interfere with the overall aesthetic appearance.
 
Slip Matched - A sheet from a flitch is slid across the sheet beneath and, without turning, spliced at the joint.
 
Slope - See grain
 
Smooth, Tight Cut - Veneer cut to minimize lathe checks.
 
Sound Transmission Class (STC) - A single number rating system derived from measured values of sound transmission loss or the acoustical performance of a building element, such as a door, window or wall. The higher the STC value, the better the rating and the better the acoustical performance value. Tested in accordance with ASTM E413 and E90.
 
Split Heart - A method of achieving an inverted "V" or cathedral type of springwood (earlywood)/summerwood (latewood), plain-sliced (flat-cut) figure by joining two veneer components of similar color and grain. A cathedral type figure must be achieved by a single component in AA grade; the split heart method is allowed in grades A and B. Each half of a split heart shall be subject to the minimum component width requirements for grade A and B faces.
 
Splits - Separations of wood fiber running parallel to the grain.
 
Splits, Hairline - A perceptible separation or absence of wood fiber running parallel with the grain.
 
Standard Door - By industry practice, a standard door is book size in both width and height.
 
Staved Lumber Core (SLC) - Made with any combination of blocks or strips of wood, not more than 2-1/2 inches (64 mm) wide, of one species of wood glued together (in butcher block fashion), with joints staggered in adjacent rows.
 
Sticking - A profile machined on to the edges of stiles, rails, mullions, muntins or bars, adjacent to the panels, glazing materials or louvers.
 
Stile - The outermost vertical member of a stile and rail door.
 
Stiles/Vertical Edges - The upright or vertical pieces of the core assembly of a wood flush door. Measurement. The width of the vertical edge/stile is measured at its widest side (the wide side of a beveled door).
 
Streaks, Mineral - Sharply contrasting elongated discoloration of the wood substance.
 
Structural Composite Lumber Core (SCLC) - An engineered wood product that is made by fusing a network of wood strands together with a water-resistant adhesive to produce a strong, solid and stable product that has true structural properties with excellent screw holding properties and very high split resistance.
 
Sugar - See Worm Tracks.
 
Sweep - See Grain
 
Tape - Strips of gummed paper used to hold the edges of the veneer together at the joints prior to gluing.
 
Telegraphing - See Show Through.
 
Tight Side - In knife-cut veneer, that side of the sheet that was farthest from the knife as the sheet was being cut and containing no cutting checks (lathe checks).
 
Transom - The panel above a door or set of doors.
 
Twist - A deviation in which one or two corners of the door are out of plane with the other corners of the door.
 
Veneer (wood) - A thin sheet of wood, rotary cut, sliced, or sawed from a log, bolt, or flitch.
 
Veneered Construction - See Engineered Construction
 
Vine Streaks (Mark.) - Scars in the wood generally caused by the stems of clinging vines or by their hair-like roots, which cling to the tree trunk. Live vine streaks produce round scars. Dead vine streaks contain either dead residue of the vine, or the remaining pocket similar to bark pocket. Most vine streaks run across the grain, and therefore, all vine streaks are considered defects in accordance with restrictions described in veneer grading rules.
 
Voids - See Gaps.
 
Warp - Any distortion in the plane of a door itself and not its relationship to the frame or jamb in which it is to be hung. The term warp includes bow, cup and twist, which are defined as follows: Bow-A flat wise deviation from a straight line drawn from top to bottom; a curvature along the length of the door. Cup-A deviation from a straight line drawn from side to side; a curvature along the width of the door. Twist-A deviation in which one or two corners of the door are out of plane with the other corners of the door.
 
White - When referring to color and matching, veneers containing all sapwood, ranging in color from pink to yellow.
 
Wood Filler - An aggregate of resin and strands, shreds, or flour of wood, which is used to fill openings in wood and provide a smooth, durable surface.
 
Wood Flush Door - An assembly consisting of a core and one or more edge bands, with 2 plies of wood veneer with laminate, wood, or wood derivative on each side. All parts are composed of wood, wood derivatives, fire resistant composites or decorative laminates.
 
Worm Track (Scar) - Marks caused by various types of wood attacking larvae. Often appear as sound discolorations running with or across the grain in straight to wavy streaks. Sometimes referred to as 'pith flecks' in certain species of maple, birch and other hardwoods because of a resemblance to the color of pith.
 
The Language of Doors
Below are some additional terms which have been used to describe windows or doors or their component parts. These definitions are not included in current industry standards.

Bark - Areas of fiber from outside a tree.
 
Chalk - White or other color chalk marks used by mills for some form of identification marking defects for repair.
 
Chicken tracks - Expression for scars which give the particular effect of a chicken's footprint. It is caused by air roots or vines.
 
Pitch - Bleeding resin.

 




+ Doorlite Profiles



+ Forms

Contact us at: 773-809-3667 or Email us at: sales@CenturyDoor.net

ABsupply.net
©2014 CenturyDoor.net / ABsupply.net. All rights reserved.